E-Mu Ultraproteus Manual do Utilizador descarregar pdf (Página 7)

Chapter 1: Basic Setup 7

CONNECTION INSTRUCTIONS

SETUP #3 PERFORMANCE SETUP

R - SUB2 - L R - SUB1 - L R - MAIN - L

MONO STEREO

THRUOUTIN

OUTPUTS

MIDI

Scotts Valley, California U.S.A.

100-250VAC 50/60 Hz ~

E-MU SYSTEMS, INC.

WARNING: TO REDUCE THE RISK OF FIRE

OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS PRODUCT TO RAIN OR MOISTURE.

Sub Output

Return

(To Main Output)

Tip Ring

To Effect From Effect

SEND/RETURN CABLE

Send/Return

Effect Device

Sub Outs 1 = NO Internal Effects

Sub Outs 2 = From Internal Effects

Main Outs to Mixer In

Additional

MIDI

Devices

MIDI Controller

(MIDI Keyboard, Sequencer, etc.)

MIDI Out

MIDI In

Send

Signal is sent out on tip of plug and

returned to main outputs via ring of plug.

MIDI In

UltraProteus is controlled by MIDI messages received at the MIDI In connector.

Connect the MIDI In of UltraProteus to the MIDI Out connector of a MIDI

controller such as a MIDI keyboard, MIDI wind controller or MIDI guitar

controller.

MIDI Thru

The MIDI Thru jack is used to connect additional MIDI devices onto the MIDI

chain. MIDI Thru transmits an exact copy of the messages received at the MIDI

In jack.

Audio Outputs

Each of the Sub 1 and Sub 2 output jacks on the UltraProteus are stereo jacks.

The tip of each jack (accessed when a standard phone plug is inserted) is the left

or right output of that group. If a stereo plug is inserted, the Ring of the stereo

plug serves as a signal Return which sums into the Main outputs. The Sub 1

outputs bypass the internal effects. Sub 2 are the outputs of the internal effects.

1 2 3 4 5 6 7 8 9 10

Comentários a estes Manuais

Sem comentários

E-Mu Ultraproteus Manual do Utilizador Página 7

Comentários a estes Manuais

Manuais e produtos relacionados com Sintetizador E-Mu Ultraproteus